Price: [price_with_discount]
PRODUCT SPECIFICATION
|
Capacity (Q) |
0.5m/h to 18m/h |
|
Head (H) |
10m to 70m |
|
Flow Rate |
1T/h, 2T/h, 6T/h, 12T/h, 25T/h, 55T/h (under 40m head) |
|
Voltage |
220V/380V/440V |
|
Motor Phase |
Single-phase / three-phase |
|
Power (P) |
0.55kWto7.5kW |
|
Frequency |
50/60 Hz |
|
Liquid Temperature (T) |
-15°C to +105°C |
|
Speed |
2900 rpm |
|
Standard Material |
Stainless Steel 304 |
OVERVIEW
The gas-liquid hybrid pump has a direct motor connection structure, the pump structure and performance can be matched with American, European and Japanese pumps, the pump is made of stainless steel casting.
The suction port of the gas-liquid mixing pump can use negative pressure to suck in gas, so there is no need to use air compressor and atmospheric ejector.
The high speed pump impeller mixes and stirs the liquid with the gas, so there is no need for an agitator or mixer.
Due to the pressurised mixing in the pump, the gas is fully dissolved with the liquid and the dissolution efficiency can reach over 80%. Therefore, no large pressurised dissolved gas tanks or expensive reaction towers are required to produce highly dissolved liquids. A gas-liquid mixing pump attracts, mixes, dissolves and delivers the highly dissolved liquid directly to the point of use.
Therefore, the use of a gas-liquid mixing pump increases the efficiency of the dissolved liquid production, simplifies the production unit, saves space, significantly reduces the initial investment and saves operating and maintenance costs.
PRODUCT FEATURES
1. Suction of water and air at the same time, pressurized mixing in the pump, micro-fine bubbles up to 0.1-20 microns.
2. High efficiency of gas-liquid dissolution, stable performance, easy to operate and maintain.
3. Air floatation device can replace pressurized pump, air compressor, venturi injector, high pressure dissolved air tank, air-water mixer and release head, etc. It can overcome the problems of unstable operation and large bubble tumbling of traditional devices.
4. Ozone water production device can replace booster pumps, jet streamers, large oxidation towers, etc. The efficiency of gas-liquid dissolution is more than 80%, which is 2-4 times higher than the efficiency of venturi mixer, significantly reducing equipment investment and operating costs.
WORKING CONDITIONS
1. QY and QYL designed for clear and low viscosity liquid, or iquid containing extra-fine foreign matters.
2. QYB and QYLB designed for clear and low viscosity liquid, or explosive flammable liquid which containing very little solids.
3. Liquid temperature: -15℃~105℃
4. Maximum ambient temperature: +40℃
5. Gas-liquid ratio 1:9 (gas suction volume 8~10%)
6. The horizontal direction is the suction port, and the vertical direction is the discharge port.
PRODUCT PARAMETER
|
Gas-liquid Mixing Pump |
|||||
|
Power |
Voltage |
Head(m) |
Flow rate(L/H) |
Thread size of inlet |
Thread size of outlet |
|
550W |
220V/380V |
40 |
1000 |
1/2' |
1/2' |
|
750W |
220V/380V |
40 |
1000 |
1/2' |
1/2' |
|
1100W |
220V/380V |
40 |
3000 |
3/4' |
3/4' |
|
1500W |
220V/380V |
40 |
3000 |
1' |
3/4' |
|
3000W |
380V |
40 |
6000 |
1-1/4' |
1' |
|
Nano Bubble GeneratorNano Bubble Generator |
|||||
|
Power |
Voltage |
Head(m) |
Nano bubble water flow rate(L/H) |
Thread size of inlet |
Thread size of outlet |
|
550W |
220V/380V |
40 |
250 |
1/2' |
1/2' |
|
750W |
220V/380V |
40 |
500 |
1/2' |
1/2' |
|
1100W |
220V/380V |
40 |
1000 |
3/4' |
3/4' |
|
1500W |
220V/380V |
40 |
2000 |
1' |
3/4' |
|
3000W |
380V |
40 |
4000 |
1-1/4' |
1' |
HOW TO SET UP THE BUBBLE GENERATOR?
1. Fit the machine with water hose and power cables according to the diagram, and fill the machine with water before use.
Remove the water inlet valve, raise the water inlet hose and fill it with water, wait until water comes out of the outlet valve, put back the water inlet valve and tighten it by hand.
2. Close the gas flow meter, turn on the power supply, wait for the machine to pump water normally (the sound becomes louder), then slowly open the gas flow meter and adjust it to the specified position, within about 30 seconds the pump will produce nano bubbles (the sound quietens down).
APPLICATION
1. Air suspension treating equipment, ozone water preparing equipment, and biological treating equipment.
2. Feeding of heating or cooling medium for various temperature adjusting devices.
3. Various filters: sucking or high pressure transferring low viscosity liquid from underground tank, such as gasoline and various solvent.
4. Misting treatment of clear water, pure water, foods, chemical solution and waste solution.
5. Strict applications (continuous running, abrupt variation in hydraulic pressure): such as small scale stream boiler, high building water supply, high pressure water injection to high pressure tank, and suction from vacuum tank.
7. Sampling from river or tank, transfer foamable liquid, transfer liquid through long and horizontal pipeline, where air pockets likely occur.
FAQ
1. How fast can I get the quotation?
Contact us on AliExpress. If you are very urgent to get the price, please call us by WhatsApp or Skype.
2. How to pay?
(1). After confirming all the details with us, you can simply add our products to your shopping cart and pay for them.
(2). To pay offline, you can pay by T/T, Western Union, PayPal, Alipay and WeChat Pay. We will send you our account information.
(3). We will handled your order within 24 hours upon receiving cleared payment.
3. How fast can I get my package?
(1). DHL: Southeast Asia 3-4 days / others 3-5 days.
(2). FedEx: Southeast Asia 3 days / others 4-6 days.
(3). UPS: Southeast Asia 3-4 days / others 4-6 days.
(4). TNT: Southeast Asia 3-4 days / others 4-6 days.
